0.07 N/50mm Release Force and 95% Residual Adhesion from a PET Silicone Release Film Factory and Supplier
Product Overview
If one gauge in the silicone release range covers the widest range of jobs, it is 25μm. It is thin enough for delicate lamination, yet sturdy enough to run through slitting and sheet cutting without constant handling issues. This 25μm PET Silicone Release Film is a light-release silicone-coated polyester film designed for molding, lamination, and protective film processes. It delivers a 31B release strength of 0.07 N/50mm at room temperature and 0.12 N/50mm after 70°C aging, with a residual adhesion ratio of 95%. Those values only stay stable in volume production when the PET Silicone Release Film Manufacturer controls silicone coating weight and cure consistency tightly.
Technical Characteristics
The following values are representative measured data for the 25μm specification. They are not guaranteed values.
- Base film thickness: 25 μm
- Coating: Silicone release coating
- Features: Light release
- 31B Release strength (ordinary temperature × 24 hours): 0.07 N/50mm
- 31B Release strength (70°C × 24 hours): 0.12 N/50mm
- Residual adhesion ratio: 95%
- Adhesion (resistance to abrasion by toluene): Pass
- Wettability (mold release surface): 30 mN/m or less
- Base film heat resistance: 150°C for 30 minutes
Key Properties
- Light and stable silicone release force at room temperature and after heat aging
- High residual adhesion ratio of 95%
- Consistent silicone coating wettability for mold release surfaces
- 25μm base film with a practical balance of thinness and handling
Applications
25μm PET Silicone Release Film is used as a mold release film, carrier film, and protective film in composite molding, adhesive processing, electronics lamination, and general industrial release applications. It suits roll-to-roll and sheet-based production where a general-purpose silicone release film is required.
Why Choose Jinlu Film as Your Manufacturer
Jinlu Film is a PET Silicone Release Film Manufacturer, Factory, and Supplier with factory-direct pricing, stable silicone coating quality, and consistent release performance. As a factory, we support custom slitting and sheet cutting, export-grade packing, and global shipping. If you are comparing PET Silicone Release Film suppliers, request a sample and compare our release force data against the spec sheet.
Contact us today for a factory quote, technical data, or a sample of 25μm PET Silicone Release Film.
