0.019mm PET Release Film
0.019 mm (19 μm) is a step up from our 12 μm grade: still thin, with a little more body for handling. It is available from stock, with slitting and sheeting services provided, and is ready for immediate shipment. It is used for electronics and die-cutting, among other uses.
Key Specifications
| Thickness | 0.019 mm (19 μm) |
| Color | Transparent |
| Width | 1090 mm / 1260 mm / 1560 mm, or custom widths |
| Release type | Single-sided release |
| Release force | 8 to 12 g |
| Processing | Slitting and sheeting available |
Typical Uses
- Printing and packaging
- Coating
- Insulation
- Die-cutting
- Double-sided tape
- Labels
What Release Force Means
Release force is the force needed to peel an adhesive away from the film. A lower value means the adhesive separates more easily. The right level depends on your adhesive, so test the film with your own material before mass production.
Choose Your Thickness
For the thinnest option, see 0.012 mm. For more body, see 0.025 mm or 0.1 mm. We also list a 19 μm PET silicone film. The whole range is in the PET release film category, and the full description is on our main PET release film page.
FAQ
What widths do you stock?
1090 mm, 1260 mm and 1560 mm, or custom widths.
Is it single-sided or double-sided?
Single-sided release. To compare, read single-sided vs double-sided release film.
Can you slit or cut the film?
Yes. Slitting and sheeting are available.
Can I get samples?
Contact us with your adhesive type, width and quantity, and we will send a quote and samples.
